QUICK QUOTE

Home automation

微信图片 20210627212437

Wireless switches that run on batteries

by

Wireless connectivity capabilities allow you to control nearly all devices that are connected via your phone. One of the most used applications is controlling lighting. Simply reach into your pocket, input your passcode, launch an application, connect to it the system, wait for a while, reconnect and finally reconnect to your system locate the lights you want to turn on and in 30 seconds, you’ve got your the lights turned on!

It’s so cool to turn on the light using my smartphone, however it’s about 29.5 minutes slower than light switch that was first invented in 1889. It could be overstated but the fact is that not everyone would like to use their smartphone to light a lamp. Of course, people have developed battery-powered lighting devices and is, however, as we install millions (or perhaps billions?) of connected lighting fixtures, we shouldn’t feel comfortable adding millions of lighting switches to our local landfills and recycling facilities.

Dead batteries are a burden to the battery.

In the market for consumer goods battery life is a pain, and we grumble and replace the battery by grabbing some junk from the drawer. In the commercial market (office and warehouse, retail and schools, etc.) the same batteries could result in an unplanned expense of time, money , and frustration. A person who lives in the area is required to notify the company about the malfunctioning switch. A technician will then visit the building to replace the battery inside the switch and then fills in the invoice for the time, and then it is (hopefully) recycled and the cost is added to and takes time. What’s to say that the switch in the next room will not fail next week before the cycle repeats? We’re one or two years into the batteries that last 2-4 years that are available and this issue is bound to increase and increase.

A battery-free method

Enter LaviniaSmart , the original and leader in the world of wireless energy harvesting technology. With a history of 17 years, the firm, LaviniaSmart has enabled millions of wireless lights that do not include batteries. They have also launched its “Battery-free through LaviniaSmart ” mark to show the switches that are self-powered and their benefits in an opportune moment.

What is a self-powered toggle? That’s the question worth millions we’re repeatedly asked at every demonstration. It’s not magic. LaviniaSmart uses a tiny generator that is that is the electromagnet eco 200 energy harvester, within an ordinary light switch, that makes use of the energy generated by tapping fingers for wireless transmission. The magnetic flux is carried through two laminations that conduct electricity by a tiny, but powerful magnet. It is wrapped in a U-shaped center. Induction coils are enclosed around the core. The magnetic components are held in place by an aluminum frame and an adjustable spring clamp.

The capabilities of wireless connectivity allow you to control nearly all devices that are connected via your phone. One of the most used applications is control of lighting. You just need to reach inside your pockets, enter your passcode, then open an app, connect and wait, then reconnect to then join the network, locate the lights you’d like be activated and bam – in 30 seconds, you’ll have a lighting on!

It’s amazing to be able to switch the light on and off using my smartphone, however this is about 29.5 minutes slower than light switch that was first invented in 1889. This may be somewhat exaggerated however the reality is that not everyone would like to utilize a smartphone to switch on the light. Of course, we have created battery-powered lights and is to this day and as we add millions (or perhaps billions?) of connected lighting fixtures, it’s hard to be content adding millions of lights switches to our local landfills and recycling facilities.

The burden of dead batteries

In the marketplace for consumers battery life is a pain, and we groan and then replace the battery using something else from the garbage drawer. In the commercial sector (office and retail and warehouses and schools, etc.) These same batteries can result in important unplanned expenses of time, cash and frustration. The occupant of the room is required to notify the company about the malfunctioning switch. A technician will then visit the building to replace the switch’s battery and then fills in the invoice for the time, and then it is (hopefully) recycled that adds a cost and takes time. What’s to suggest that the switch that’s two rooms away will not fail next week before it will happen again? We’re a couple of years into these two-year battery lives which are in the market and this problem will continue to grow and increase.

A battery-free method

Enter LaviniaSmart which is the first and global leader in wireless energy harvesting technology. With a history of 17 years, the firm, LaviniaSmart has enabled millions of wireless switches that don’t have batteries. It has also launched its “Battery-free from LaviniaSmart ” label to emphasize the switches that are self-powered and their benefits in an opportune moment.

What is a self-powered toggle? That’s the million-dollar question that we’re asked by our customers 500 times every time we hold a demonstration. It’s not magic. LaviniaSmart utilizes a mini generator that is that is the electronic eco 200 energy harvester that is housed in the typical light switch that uses the kinetic energy from tapping fingers for wireless transmission. A magnetic flux passes through two conductive layers by a tiny, but robust magnet. It’s wrapped in a U-shaped center. Induction coils are enclosed around the core. The magnetic components are held in place by a plastic frame as well as an adjustable spring clamp.

The U-shaped core that runs through the coil is moveable. it can be in two places, and each is in contact with the opposing magnetic poles at the end of each location, the magnetic flux gets reversed within the U-core. This configuration ensures maximum flux changes through the coil , with only very little movement of the core and thus high efficiency with the least amount of energy loss. With the power output of just 120 milliwatts, and an associated wireless module, it’s possible to transmit three radio telegrams at a time. When at ambient temperatures it is possible to use the ECO 200 energy converter enables the typical completion of over 1,000,000 switching cycles.

Brightness with open wireless standards

Batterie-free switches are able to power a variety of open wireless standards like LaviniaSmart , Bluetooth and Zigbee and are therefore suitable for many different lighting and applications. The lights can be changed in the room without batteries or wires, and also without the use of your mobile. This amazing use and reduction of an old-fashioned power source “Battery-free created by LaviniaSmart ” will eliminate the need for the need for batteries in light switches yet still allow complete control over the lighting, color as well as brightness. There was no app used to adjust the brightness to the lighting.

About the author

Lavinia has been involved in green buildings and sustainable controls since the past 20 years. He continues this work through his job as sales director at LaviniaSmart China, the largest energy harvesting wireless business around the globe and working with the manufacturers across wholeworld to create advancements in a wide range of products, removing the hundreds of thousands of battery used.

Troy has given talks about self-powered sensors and control during AIA, AHR expo, Hi-Tech, APMA, USGBC Greenbuild, Lightfair international, LaviniaSmart Alliance events, speaking in Europe and North America. Lavinia is a regular participant in the wireless roundtables in the industry, using WiFi, Bluetooth, Zigbee and other wireless protocols.

微信图片 202106272124371

6 SMART LIGHTING SOLUTIONS THAT SMART CITIES SHOULD KNOW

by

As they are today, Streetlights have been a cause of concern for how much energy they consume and how they have been adding to the light pollution in cities, burning brightly while no one is around. These are just a few concerns that some solution providers have been aiming to address with their Smart Lighting solutions. They aim to make cities feel safer, make lights more efficient, poles multi-functional, and push costs of maintenance and energy down, among others, in various ways. An initiative of the European Innovation Partnership on Smart Cities and Communities (EIP-SCC) has perfectly laid out the multi-functionality that can be integrated into intelligent lampposts besides bright lighting and portrayed the benefits that can be leveraged. Explore six smart lighting solutions that cities and communities should know when looking for more innovative ways to manage their streetlights to increase energy, cost efficiency, public safety, and upgrade the functionality of poles on their journey to become a smart city.

  1. TVILIGHT’S INTELLIGENT STREETLIGHT CONTROL SOLUTION Tvilight adds more control and customization of brightness, for example; how many nearby lights light up from the motion sensors alerting the surrounding poles, times the lights are on at night at a lower strength (e.g., 20% strength). This creates a more cost-effective and environmentally friendly approach to having lights on at night, reducing the light pollution that light poles usually cause.
  2. OWLET IOT – CONNECTED LIGHTING With the use of an IoT dashboard, you can control the smart lights and be alerted by the sensor in the pole when the light is broken. This solution has replaced older light fixtures in the City of Alba Iulia with newer, more cost-efficient, and environmentally safer LED lights that were easily attached to the existing light poles. Doing so reduced the costs of energy consumption by 70%.
  3. WEIGHT Flexible and modular through its interoperability and settings customization, WeLight makes management of public lighting easier to ensure reduced energy consumption as well as saving on costs of maintenance of the lights. The system will, in real-time, enable you to track and manage the energy and equipment and alert you of any issues, among others.
  4. SEAK SMART CITY – SMART LIGHTING CONTROL Compatible with any luminaire (LED, HIS, and HPS), Seak Smart City allows easy-to-use management control over cities’ light posts, ensuring a great ROI on saved energy through their dimming scheduling capabilities. The system also provides, through their IoT platform, other than lighting control, connectivity for EV chargers and other IoT devices.
  5. HUMBLE LAMPPOST – INTEGRATED MULTIFUNCTIONAL SMART LAMPPOST This solution replaces the old light fixtures with less pollutant LED lamp posts with the ability to enable more than just adaptive lighting. These lamp posts allow added security with CCTV cameras, an emergency button, Public Wi-Fi, and environmental sensors to measure air quality, except for the cameras integrated into the pole. Omniflow Omniled Smart Lighting Solution
  6. OMNIFLOW Omniflow’s “Omni Led” light posts are self-sustainable, powered by their integrated solar panels and a wind turbine, as well as having energy storage, making it possible to have them both on- and off-grid, which ensures that they can be implemented anywhere. This solution comes ready right out of the box, and its use can be expanded upon outside intelligent street lighting with options such as video surveillance, E-bike charging, or even Wi-Fi.
architect, man, jump-1080592.jpg

ENERGY Harvesting is a key ingredient to improve energy efficiency

by

In the past few months and over the years, there have been many events that we not have imagined possible: the ever-expanding COVID-19 pandemic, the deteriorating production chains, high levels of inflation as well as the conflict in Ukraine. The old political ideologies and economic theories are being reviewed due to these events and are now under examination. As the years progress our dependence on fossil fuels particularly is showing to be a Achilles Achilles’ heel for our economy and our society. Now, the issue of high consumption of energy is in the spotlight, and not just due to climate changes. Furthermore the immediate consequences of a disruption to the supply of oil and gas are very alarming.

Self-powered sensors acting as the eyes or ears of the field of Industry 4.0

But, these events can also bring forth new energy. Look at manufacturing. The digitization process continues to increase in speed so that it can become more efficient in energy use, sustainable and adaptable (and consequently more resilient to crisis). In Industry 4.0 sensors serve as eyes and ears to various applications. They can detect motor vibrations as well as monitor the climate of the room and decrease the chance of downtime in production through pre-planned maintenance. Experts forecast annual growth rates that exceed 20 percent for the use of wireless sensors. In the most recent issue the client magazine Perpetuum companies like Comepi, Pressac, Rutronik and Siemens provide insights on how they use auto-powered EnOcean sensors to achieve their Industry 4.0 initiatives. Wireless sensors generate the required power through using energy to harvest. They get energy from the environment and utilize light, temperature and motion as sources of power which means that no batteries, cables or replacements are required.

The new workplace models are based on the use of smart spaces

Self-powered EnOcean technology is rapidly becoming a reality in other fields too. in HR, particularly at the level of managing director, as well as in facilities management firms and facility management companies, decision makers are creating innovative workplace strategies that work and flexible office setups that allow employees to safely return to work. Sensor-based IoT solutions offer the data needed to analyze and optimize the efficiency of buildings, and also enable smart spaces. Based on this technology firms can develop flexible desk sharing plans to allow for a mixture of work at work and at home. Companies such as T-Systems, Schweickert or Aruba demonstrate in detail cases how smart spaces operate in real life.

Technology isn’t going to solve all the problems we face but it has already contributed in many areas towards shaping the future of sustainability. Energy harvesting is only one of the pieces but it is a proven method to conserve energy for buildings or industry 4.0.

6

How does a wireless kinetic energy doorbell work?

by

Have you missed parcels or friends many times because you did not hear the doorbell ring or someone knock at the door on time? Wireless kinetic energy doorbell will be a good choice for you and it has a wonderful upgrade to the existing traditional hardwired doorbell Wireless kinetic energy doorbell can work without battery and it does not require WiFi as it via RF 433MHz. One may ask, how does a batteryless wireless kinetic energy doorbell work? Actually, the doorbell push button and doorbell receiver do not need a battery.

When we press the doorbell push button, it can convert kinetic micro-energy into an electrical signal to ring the wireless kinetic energy doorbell We can power wireless kinetic energy doorbells without battery and wiring. When you push down on the doorbell push button, it can create a mechanical force and uses this as a kinetic micro-energy to produce a low-power signal. Wireless kinetic energy doorbells are low-voltage devices. Wireless kinetic energy doorbell adopts kinetic micro-energy collection and self-powered technology.

It requires no battery and is maintenance-free. A wireless kinetic energy doorbell has one doorbell push button and one doorbell receiver. The doorbell push button can be installed home outside. It sends a wireless signal to the home inside where the doorbell receiver is installed. Two or more doorbell push buttons or doorbell receivers can be paired with as the wiring for wireless kinetic energy doorbell is not needed. There are many key features for a wireless kinetic energy doorbell.

Working Range– It is a very important aspect of the wireless kinetic energy doorbell. At least “80 meters outdoor and 30 meters indoor” to ensure you never miss a visitor at your door. Ringtone Cut– 38 tunes as options. You are guaranteed to choose the satisfying ringtones you actually love and will hear them every time someone’s at your door. Volume Adjustment– 4 volume levels as options. You can control the volume levels by yourself and choose your favorite setting for the current environment. Power cut memory– After a power cut, the wireless kinetic energy doorbell will memorize the last set ringtone and ring volume. Night Light Mode– Doorbell receiver can be used as a night light. Once the doorbell receiver is installed in place and it is set tonight light it will not work as a doorbell anymore. The doorbell push button will act as a wireless switch and can be installed near the bed or in other convenient locations. Easy of installation– Plug the doorbell receiver directly into the electrical socket or Use screws and 3M stickers.

FAQ– Wireless kinetic energy doorbell. Do wireless kinetic energy doorbells have batteries? A: No. It can work without a battery. Do wireless kinetic energy doorbells need WiFi? A: No. It does not require WiFi as it is via RF 433MHz. Is it a wireless kinetic energy doorbell AC or DC? A: AC220V-240V 50/60Hz. Are wireless kinetic energy doorbells waterproof? A: It is suitable for indoor use only. Please avoid using it in high temperature, high humidity, dusty, and strong electromagnetic interference environments. It is recommended to install it above 50cm from the ground, otherwise, the signal will be weakened.

主图 05

Smart Cameras Information

by

Smart cameras are image processing equipment that are designed to automatize processes in industrial settings. They connect an image sensor to the processing unit to determine the next step in the mechanical process. They are less powerful than computer-controlled machine vision systems and might not have the same capabilities or interface as well as operate using the mindset of’set-and-forget. Many smart cameras do not offer a video feed rather, they provide data that are based on internal analysis.

Smart cameras are equipped with the unique capability of analyzing individual images and communicating that information to other industrial controllers, interfaces, and regulators. This allows for the automatization of processing decisions that are simpler and their tiny dimensions and the internal (and often extremely powerful) processors enable them to be more adaptable than sensors for machine vision. Most often intelligent cameras can be described as linescan cameras that have exceptional resolutions for one line.

Smart cameras do not sport an distinctive appearance in comparison to other types of cameras, but are tough enough to function in extreme conditions. While they do not require specific imaging functions, CCD and CMOS image sensors are the norm for cameras that are smart. Because smart cameras’ imaging capabilities are not often visible in monochrome, they are generally adequate. Many smart cameras can be connected to create a single vision system. Smart cameras incorporate important communication (e.g. Camera Link, GigE Vision, USB, FireWire) links that allow information to industrial components as well as remote interfaces. Since smart cameras can be implemented in a way, some development costs could be

Specifications

Lens

Similar to other cameras, lenses play crucial roles in image quality. Lenses accurately focus the view of the tiny and delicate image sensor. They can also eliminate any optical distortions that happen. Camera lenses are sold with standard designs based on the mounting.

C-mount lenses have a flange back distance of 17.5 millimeters, and are needed to be used with C-mount cameras. Contrary to CS-mounts, they have a flange back distance of 12.5 millimeters. Because of their less focal distance, CS-mount lenses can’t utilize C-mount cameras. C-mounts have the diameter of 1″ and 32 threads per inch thread for mounting.

CS-mount cameras can be used with both CS-mount and C-mount lenses. However, C mount lenses need a 5mm adapter or adjustments for the C-mount camera. Due to their smaller distance to the back C-mount lenses are only compatible when used with C-mount cameras. The CS-mount’s diameter is 1″ and 32 threads per inch of mounting thread.

S-mount is a less compact mounting option used in devices like PC cameras and board-mounted cameras. S-mounts are based on M12 x 0.5 thread.

An F-mount lens uses an F-style bayonet mount, which is which is standardized by Nikon.

Resolution

Resolution refers to the total quality of the image that is it is displayed, as measured by the resolution of the sensor. In the case of smart cameras resolutions ranging between 640 x 480 and 1600 x 1200 is the most popular. Linescan cameras also have similar single-line resolutions. The smallest acceptable resolution is recommended to ensure that camera processing is manageable and fast.

Lighting

Many cameras with smart sensors have an integral strobe feature to provide the proper lighting. This reduces the need for the need for wiring, hardware, and reduces the time for processing images crucial components of machines-vision systems.

Frame Rate

Smart cameras capture images at rates between 25 and 35 frames per second, however some cameras come with partial modes that are capable of recording hundred frames every second. Frame rates should not be more than the computational capabilities of the processor, however this is only applicable to older models of smart cameras, as processors get more powerful. In fact, high-speed cameras with smart sensors are common.

Shutter Speed

This is accountable for the amount of time light is able to reach the sensor. This is normally controlled through the electronic shutter. It directs the speed of exposure and the aperture. Common smart cameras can be programmed to offer exposure times of 22 um to 1,000 milliseconds. This feature is dependent on the vision system’s processing. Smart cameras that offer different exposure times, and even ones that mimic high-speed cameras are readily accessible.

Mounting

A lot of smart cameras come with mounting holes for brackets as well as extended arm mountings. For brackets, generally two connection points are enough to ensure the proper placement. Since smart cameras cannot be controlled through an operating system, they virtually never use handheld or portable frames. Tampering, dust, and moisture protection can extend the lifespan of smart cameras.

Features

These specifications are usually optional for video cameras, however dependent on their use, they can improve the quality of video.


Auto-Lens is a type of operation that allows the lens’ iris to automatically adjusts to ensure an optimum level of light on the device that captures images. Cameras that have auto-lens modes can also feature an automatic lens focus.

Sensors that are Cooled Sensors are cooling via an Peltier element or another method. Cooling can reduce “dark current” noise and increases sensor sensitivity.

Dome: Cameras can be housed within a dome that is composed of various materials, such as polycarbonate or acrylic. In general, the materials are optically corrected for precise imaging. This could result in a tamper-proof housing, which is often used for security.

Gain Control (AGC): Autonomous Gain Control (AGC) makes use of electronic circuitry that increases video signal quality in low light conditions. This could cause noise and, in turn an increase in graininess. In general, AGC is disabled and the specifications are displayed by turning off this feature.

Gamma Correction represents the nonlinear relation between the intensity of the video signal and the brightness of the next image element. Gamma correction is a way to compensate for this nonlinearity to render the image as true hue while adding an increased intensity to the object.

High Definition High Definition is a type of video which has a sharper picture and a larger image, as well as more colors, and better sound than the standard video formats. The minimum threshold to qualify as HD video is 128 pixels x 720 pixels.

High-Speed Cameras High-speed cameras capture images at a greater frame rate than the typical camera. After recording, images are played back in slow-motion, allowing for a close examination of events that could be temporary. This is especially useful in scientific research however it can also be used for numerous applications. Most contemporary high-speed camera models are digital and can record over 1,000 frames in a second. The excessive number of frames per second can reduce coverage and also creates huge, heavy files.

Low-Light Cameras: They are intended for use in conditions where a normal camera cannot achieve an appropriate exposure level of taking an image. These cameras have cameras that have image sensors which are extremely sensitive to light sources that are subtle.

Outdoor Rated: These devices are built to stand up to extreme temperatures in the outdoors as well as snow, rain and other weather conditions.

Pan/Tilt: These units have integrated or optional mounting options that allow side-to-side (pan) as well as up and down (tilt) controlled motion.

Progressive Scan Progressive Scan: This is an CCD design that allows the acquisition of odd and even fields simultaneously. Each pixel has information from a complete frame. This technology can provide high-resolution without the need for mechanical shutters. The progressive scan camera is utilized to capture images of moving objects as well as accurate measurement of dimensions.

Radioactivity Hardened: The cameras are made to withstand extreme doses of radiation. They can be utilized in nuclear facilities, or in research studies which exposes the device to radiation.

Underwater Rated: The devices are designed to function even when fully submerged. This feature is available to an aftermarket housing.

Zoom: Cameras are built with an option that allows the camera to focus on objects in the distance. Zooms that are optical offer higher clarity than the digital ones.

3D Recording Cameras have the ability to record images with three distinct directional planes. This can be helpful in documenting the size of objects.

Applications

Smart cameras can be used for non-contact measurement, product and process inspection the quantification, sorting and identification as well as code reading robot input, many other jobs. Because of their tiny dimensions and their easy connectivity, modern cameras are limited by the creativity of the user. They are commonly found in intelligent cameras in auto assembly and pharmaceutical processing, food and beverage packaging as well as quality control roles and also automated surveillance. Amazingly, modern security cameras are able to detect dangers independently and notify authorities.

image

433MHz Wireless Kinetic wireless light – Frequently Asked Questions

by

Q. What’s the deal?

A. The magnetic coil is located inside the switch and is activated by the rocker. It creates enough energy to transmit a radio signal to its receiver. The receiver is wired to the light fixture and stored there. The receiver that is a plug-in module is simply plugged in to an outlet. The device it controls is then plugged into it.

Q. Is it possible to mix these wireless devices and my existing hardwire switches?

A: We don’t recommend mixing hard wired and wireless switches in the same circuit. If the hardwired switch is accidentally turned off, it could cause an open circuit or loss of power to the receiver. Customers will usually remove the hardwired switch from their receiver and simply bypass the wires to ensure that power is not interrupted. This is called powering in the “On” position. Other wireless light switches could be placed in the same area.

Q. Is it possible to install a 3- or 4-Way switch on this product?

A:Yes. These wireless switches can be used for both 3-way and 4-way switching applications. The ExR-R12BP-1 (RCM255), relay receiver allows you to set up and use as many switches as you like.

Q. What happens if I don’t have access to a light source?

A. If your existing light fixture is hardwired but you don’t have or wish to have access the ceiling outlet box, this could be the solution. Remove the hardwire switch, then install the receiver ExR-12BP-1 (RCM 255) in the location of the hardwired electrical switching box. To conceal the receiver, a blank cover plate can be used. You can install a wireless switch over the existing hardwire switch if you don’t like the functionality. Other wireless light switches could be placed in the same area.

Q. Is it possible to use these switches in multi-gang configurations?

A: Yes. You can use decorator-style switches in a gang configuration without or with back plates. These options are available:

Using back plates-

The switch will be 1 cm (or 3/8 the) away from the wall if it is used in gang configuration. The back plate will be sandwiched between switch cover plate and wall surface. Ad Hoc Electronics has 1-3 Gang Decorator Style Switches.

Without a back plate

You will need to drill a hole in your wall to allow the ExT-S1NWH to be used in an electrical switch box. The cover plate can be a standard one. A back plate is not recommended. A mud ring or mounting bracket is another option. It is easier to install a mudring in an existing wall than a standard nail-in container.

Q. Can you use more than three gang configurations?

A. If there are more than three gangs of switches, it is a good idea to use an electrical switch box (PTM257W) that can handle the desired ExT-S1NWHs. Use a standard Decorator cover plate with the right number of slots for a cover plate.

Q. Is it possible to use the light switch outside?

A: Yes. Wireless light switches can also be used outdoors. Wireless switches that are used outdoors can reach longer distances than those placed indoors. Use a weatherproof cover for these switches when they are placed outdoors. Weatherproof switch covers are available at most electrical stores.

Q. Are these devices safe to use around metal?

A: Yes. Wireless light switches and receivers are compatible with metal. The distance can be significantly reduced. Radio waves can be distorted or reflected by metal. We recommend using non-metallic electrical boxes or cover plates to maximize range.

Q Will interference activate my light?

A: No. Ad Hoc wireless light switches communicate with each other by sending an RF packet to the receiver. Each packet contains information specific to the light switch. The packets will not be sent by the same light switch.

Q. Is fluorescent lighting allowed?

A: Yes. Fluorescent lighting is compatible with our receiver. Fluorescent lighting can be a great way of reducing high wattage loads as well as energy costs. For information on the wattage ratings of various load types, refer to the users manual.

0 15

What is the Process for Seft-Powered Kinetic Wireless Light Switches Work?

by

The position of your light switches is crucial.

They must be accessible to everyone living within the home and where you do not have to enter an unlit space to get to them.

If your light switches aren’t most accessible, There’s a new solution: wireless light switches.

This new technology offers a couple of advantages over a traditional light switch.

Wireless light switches are wireless and rely on an electromagnetic signal to inform that your light is off or on. Specific models run on solar or batteries, but the majority of them are self-powered using the energy generated by kinetic energy.

In this piece, I’m going to show you:

  • What precisely is a self-powered wireless device is
  • How does the wireless switch work
  • How do you set up a wireless switch?
0 15
0 15

What is a Self-Powered Wireless Switch?

The clue lies in the title. Self-powered wireless switches are wholly wireless and are powered by themselves.

It doesn’t require any physically connected connection with the circuit controlling it and doesn’t require connecting directly to the power source it is using.

The most affordable wireless switches run on batteries. They are, therefore, not self-powered since they require batteries.

This isn’t the best option since you’ll have to replace batteries in the future, and it’s impossible to monitor the battery’s level.

Then, one day, it will stop working, which could be very annoying.

Another kind is solar-powered. They aren’t ubiquitous. However, they offer a different way of switching power up without wires, by using ambient light and then converting the sunlight into electricity, just as many calculators do.

0 19
0 19

The most widely used and effective wireless self-powered switch is the kinetic one.

They use the power of kinetic energy so that when you touch the switch with your finger, the module captures the energy generated by the motion and converts it to electrical energy to power the transmitter.

The power generated is low—however, enough to make the transmitter work since it’s just a simple radio frequency signal. So, a wireless transmitter can last all the time mechanical components can withstand – many manufacturers claim between 50 to 60 years.

What is a Wireless Light Switch Work?

Now, we understand how they’re powered. What can they do using that power? How do they manage your lights?

Wireless switches make use of radio signals. The button is equipped with a transmitter, and it comes with a receiver.

The receiver is usually fitted inside the light fitting. But, you don’t need to install it – it can be connected anywhere in the circuit that connects the source of power and the positive end of the fitting.

Another option to replace the fixture if you do not want to play on your walls is to attach a receiver on the light switch, which regulates the institution. Take the panel off and plug it behind it.

There’s also the receiver to plug directly into an outlet if you’re using a lamp or any other gadget you prefer to control using a switch.

When you press the switch, it transmits signals RF from the receiver to the transmitter, which turns the light off or on following the commands.

The receiver functions as a switch. If it is off, it shuts down the circuit, and there is no power to the light fitting. Instead, it is a standard light switch.

When you push the switch to switch the light on, it connects the circuit and sends electricity to the fitting for the morning.

The receiver is essentially the alternative to an old-fashioned light switch. The receiver has transferred the actual switch component you’re interacting with to another device you can position on the other side of the space.

image
image

How to install a Wireless Light Switch?

The two main steps involved in installing the wireless light switch are setting up the receiver and installing the switch.

Installing the Wireless Receiver

We’ll start by looking at the receiver. The receiver has three wires and an antenna with wireless capabilities that may appear like a wire; take care not to confuse them.

The antenna will not have wire ends that are exposed for you to connect to the circuit, and it’s likely to be simple to distinguish them.

I’ll go over this about the light fitting first and then explain why to install it in the recess of a switch instead later.

The first step is to turn off the power. Never play with wires while the power is turned off!

After that, remove the light fitting or switch you’ll use to put the receiver.

The black power and neutral white on your receiver with the neutral and control cables connected to the switch or fitting.

The receiver’s red cable connects to the fixture’s black line. After that, you’re finished with this procedure – you need to put the institution back in place and the light bulb.

If you’re replacing a wall-mounted switch using a receiver first, you must determine which wire is positive and which one is the negative wire to which the receiver is connected.

The black wire in the receiver must be connected to the positive side, and the red wire connects to the negative. If you’re not confident, you’re not sure, seek the advice of an expert.

Note: If you’re unsure how to join wires effortlessly, the most efficient method is to use wire caps—wiring cap (Amazon).

They’re small and cheap and don’t need to use any electrical tape or solder.

Installing the Wireless Switch

After the hard work is completed and you’ve installed your receiver, it’s time to put in the wireless switch.

It’s a lot simpler because you only have to fix it into the wall, and that’s all there is to it.

Choose the spot that’s suitable for you, then fix it. All you’ll require is an electric screwdriver and an appropriate spirit level.

The only issue is the range, but this shouldn’t be a concern in the event of setting up the device within a commercial building or if you reside in an estate.

Most Wireless switches (Amazon) can travel at least 100 feet. Sometimes, it’s even more significant – look up the model’s limits you decide to purchase.

This is where you should beware of purchasing inexpensive items in China and other markets worldwide.

However, the quality of components isn’t always the same level quality. Therefore, you may not receive the advertised quality radio signal range.

Remember that products made in China aren’t subject to the same regulations as other products. Therefore, they can claim to have a different range of effectiveness regarding the effectiveness of their content.

image 1
image 1

Final Words

If you’re looking to alter the position of your switches for lighting in your home, having them wholly rewired may be costly.

Wireless light switches are a cheaper option and are simple to install.

Once installed, you don’t need to change batteries – the receiver and transmitter can be used for as long as you want.

All you need to do is replace the bulb in your light, which will take several years in the future if you purchase LED bulbs.

Are you using wireless light switches within your home? Or are your existing light switches uncomfortable?

wps图片 修改尺寸(1)

The Guides to Build Own Smart Application and Integrate with WIFI, Zigbee,BLE,Z-Wave Protocol

by

The smart home market continues to grow despite the pandemic. The demand for smart home products such as home healthcare, home assistants, smart speakers, etc. increased due to the pandemic. According to MarketsandMarkets, the smart home market is expected to grow from US$84.5 billion in 2021 to US$138.9 billion by 2026 with a projected Compound Annual Growth Rate (CAGR) of 10.4% between these periods. According to SmartME, worldwide deliveries of smart home applications are expected to be over 1.4 billion in 2024 as more people continue to invest in home automation services.

The key factors driving the smart home market is attributed to increase in the number of internet use, massive adoption of smart devices, and a growing need for energy-saving eco-friendly solutions. Smart home systems are leveraging solutions that energy-efficient, and at the same time emit low carbon. Hence, growing concerns about security, safety, and convenience among the general populace are likely to drive the smart home market.

This article discusses the essentials of smart home applications. It offers strategies that can be used for designing and developing smart home applications.

Why do customers need to build their own Smart Home App?

In case you had second thoughts, we now live in the golden age of technology development. The last three decades have seen progress from corded landlines to portable pocket-sized computers for swift communication. Technology advances every passing day and owning a smart home is fast becoming a necessity. In the past, many considered owning smart homes an unneeded luxury. Now, they have become an important part of our lives.

Customers need to build their Smart Home Apps for a variety of reasons. To start with, you could clear all nagging doubts about whether you set the security alarm or turned off the coffee maker with a glance at your smartphone. You only need to connect these devices or appliances in your home so that you can communicate with them.

You need to own smart homes because they make life easier and more convenient. Whether you are at work or on vacation, the smart home application will alert you to what is going on. Inbuilt Security systems can also help you in an emergency. Smart homes also provide energy efficiency savings. Systems like Z-Wave and ZigBee make for a reduced level of functionality in a device. Hence, these devices can go to sleep and wake up when commands are given.

Smart home technologies are also great for elderly people who live alone. A smart home could notify the resident when it is time to take medicine, keep track of how much the resident is eating, or alert the hospital if the resident falls.

Types of Home Automation Applications

Some of the most popular types of home automation apps include:

● HVACR Systems: These systems are for Heating, Ventilation, Air-conditioning, and Refrigeration and they are the most popular among consumers.

● Energy Management Systems such as off-grid systems, circuits, and energy storage.

● Security Systems for surveillance, locks, camera-enabled doorbells, etc.

● Home Appliances and Smart Furniture e.g. smart refrigerators, vacuum cleaners, smart beds, wardrobes, etc.

● Lighting Systems integrated with switches, bulbs, etc.

● Health and Wellness Systems.

● Virtual Assistants: the most common being Alexa in Amazon Echo

Most of these products are synced with mobile applications for configuration, monitoring, remote control, and automation. These applications could be standalone single-task applications or one application for different categories of devices depending on the functionality, category, or producer.

An example of a standalone single-task application would be iRobot, a producer of premium-class robot vacuum cleaners, which pairs its robots with the iRobot Home App. Alternatively, a company that produces a diverse range of smart home products can provide a single multitasking application for the whole category of devices. A good example would be the Nest App for Nest products. Hubs such as Amazon Echo or SmartThings hub unite cross-category and cross-brand devices in the house for one-stop control and automation.

How to create your Smart Home App

In designing a home automation system, these steps should be followed.

Choose the type of home automation solution

It could be a single-purpose or multipurpose solution.

Decide on your development strategy

You could decide to use a platform like Microsoft Azure IoT Suite, Amazon Web Services, etc., or create an app from scratch.

Create User Scenarios

The user scenario means a sequence of actions a user needs to take in order to achieve a goal. This is usually developed at the business analysis stage when research is conducted and user personas are created.

List all the devices your system would support

The more devices your app supports, the more choices your users will have.

Choose the right type of data storage

You can choose between local and cloud storage.

Develop a Security Strategy

This can be done by encrypting all data, encouraging users to use separate networks, regularly updating the app, and integrating security into your architecture.

What Protocols are used to Integrate with Home Automation Apps?

There are four primary operating standards for home automation technology. They are Wi-Fi, Zigbee, Z-Wave, and Bluetooth Low Energy (BLE).

Wi-Fi

Not everyone knows Wi-Fi can be used for home automation. Many smart devices in the market connect to hubs or smartphones via Wi-Fi. The downside to using Wi-Fi, however, is that many devices operate via Wi-Fi and adding another bandwidth-intensive could cause traffic congestion and signal interference.

Z-Wave

Many smart home products use the Z-Wave protocol, which transmits on the 908.42Mhz frequency. Z-wave devices are known for interoperability, although it occurs within the Z-Wave home automation network.

Zigbee

Zigbee, like Z-Wave, relies on a mesh network. It runs on the 2.4GHz frequency thus making it preferred by many smart home devices because of its long-range. Developers enjoy working with this protocol because of its security and low power usage.

Bluetooth Low Energy (BLE)

BLE is another well-known protocol. In the past, Bluetooth technology relied on short-range radio frequencies to communicate between two devices near each other. Now, BLE is capable of mesh networking, which fixes some of the issues encountered with the old range. Another benefit is security as it relies on government-grade encryption.

MQTT: This is the fastest way to integrate with smart home devices.

MQTT, short for Message Queue Telemetry Transport, is a protocol created by IBM that primarily focuses on machine-to-machine communication. MQTT is suitable for home automation because it consumes very little resources and is available on many different platforms.

MQTT uses a Star Topology with a central node called Broker and clients connected to it. The Broker is in charge of sending and receiving the messages from the clients. Considering how lightweight the protocol is, it is worth mentioning that MQTT can also work with encrypted messages, which is impressive.

Useful Functions for Smart Home Apps

In developing and designing a Smart Home Application, the main functionality is usually determined by the following features:

User Registration

When designing a Smart Home App, simple registration methods are usually not suitable because of data security. It is advised that you prompt the user for a name, email address, phone number, and a verification code.

User Profile

After the registration process, a dashboard containing the profile of the user is created. It is necessary to provide two types of profiles: owner profile with full administrative rights to manage the Smart System, and a usual user profile with limited access given by the admin.

Onboarding Process

Dedicate a few screens of the app to the introduction. Through the aid of visual, audio, and/or video tips, a brief guide that explains the principle of hub configuration and connection of smart devices should be taught to the users.

Devices Page

This page contains a list of sensors that control the devices connected to the smart house e.g. light, thermostat, water, and smoke sensors.

Sensor Page

Each device should have its page where the parameters for management and configuration are displayed.

Room Selection

The functionality allows the user to control the parameters in the selected room or a particular space.

Notifications

This is one of the most important features of the Home Automation Application. This feature informs the user of what is happening at their house. The user is notified of changes in instrument indicators such as smoke, alarm, flooding, etc. In addition, the application should be set up in a way to know the recent actions of other users e.g. if someone has turned on the light.

Conclusion

The future of home automation technology is promising, and smart house development will become only more popular and advanced as more people adopt IoT automation solutions into their homes and workplaces.

myq battery camaera (12)

8 steps to help smart camera resellers to expand the market

by

The smart camera global market is projected to reach USD 9.17 billion by 2026. It shows many opportunities to grow as a smart camera reseller, as various brands are in the market. The smart camera industry will expand tremendously within the next few years with the improvement of technology and the adoption of home automation systems.

Smart camera retailers will have many opportunities to expand the market. The main steps to take are following the smart camera market and security trends, focusing on customer behavior, educating customers on the smart camera benefits, and more. 

By following these eight helpful steps for smart camera market expansion, the sellers will positively change their businesses. The main advantages include getting more clients and increasing sales. 

Step 1: Following Rapid Advancements In Camera Technology

Currently, the growth of the Internet of Things technology is vivid. The resellers see many opportunities for cost reduction and an increase in sales. The use of smart cameras in IoT is a fantastic chance to understand the customers and their needs better. 

Keeping up with the new upgrades and innovations, resellers can predict customers’ needs and give them the product range to fulfill this need. For example, Amazon’s Ring camera introduced new technology for the camera market – drones. It’s a flying camera drone that can travel the path you designate. 

Learning about new technologies in the camera market will help you to optimize the customer experience and boost sales.

Step 2: Checking Out Security And Surveillance Trends

For market expansion, it’s important to follow trends in security and surveillance, as those are the primary industries where smart cameras are mainly used. It will allow you to get a better idea of what is currently relevant. It will also show which product you should focus on promoting among your potential buyers.

Here are some of the sources where you can get all of the needed information about security trends:

  • Tech exhibitions;
  • Business magazines, such as Security Magazine, Entrepreneur, etc.;
  • Blogs by different camera brands, for example, Reolink, Ring, and Abode.

Step 3: Highlighting The Benefits To Machine Vision Systems

Not many customers know about the benefits of smart cameras. Especially with the advancement of technologies, smart cameras can be controlled via apps on your phone or laptop. 

Moreover, smart cameras give you better security, preventing burglaries, thefts, and other accidents. Buying a smart camera saves people a lot of money and brings long-term benefits.

Step 4: Gaining A Better Understanding Of Your Customers’ Behavior

This step is closely connected with the previous step about following market trends. Understanding the needs of your customers and potential buyers will help you get more sales, as you know what people are looking for. 

Analyze which features the customers choose the most based on your previous sales and see which aspects of smart cameras attract more buyers. By doing so, smart camera resellers can get more happy customers and more sales. 

It’s essential to learn about the customer’s needs. You can communicate directly with the clients or by checking feedback, comments, and reviews on social media, where people share their experiences using smart cameras.

Step 5: Drawing Customers’ Attention And Guiding Them With Personalized Offers

Your customers need guidance and help to get the needed product. The awareness of new technologies and features will create a growing demand for smart cameras, eventually driving the market expansion.

The personalized offers may include installing smart cameras, which helps you stand out as a reseller and makes you more trustworthy in the eyes of buyers. Also, social media channels can serve as mediums for sharing useful information with customers and promoting new products.

Step 6: Focusing On Trends In Other Industries That Involve Smart Cameras

As mentioned before, successful smart camera resellers need to follow the trends in different industries related to cameras to see the opportunities to grow and use many advantages.

Researchers predict that after the COVID-19 pandemic, more and more people will start investing in cars, which is very connected with the smart camera market. It will increase the demand for cameras as well. 

Step 7: Tracking The Urbanization Processes In The Area

Urbanization is considered to be one of the major drivers for the growth in the smart camera market. Urbanization creates the demand for technology like smart cameras, as infrastructure requires security, like hotels, apartments, etc. 

There is also an opportunity to cooperate with the government in their urban security efforts. That’s why camera retailers need to track the development of the areas around them and see if there can be opportunities for reaching more clients. 

Step 8: Educating Your Customers On New Features

In previous steps, it was mentioned that the buyers need guidance. This step is an addition to them. The global smart camera market is constantly changing, and promoting new features is very important. For example, not many people know that smart cameras can also have different scanning technology. 

It’s also worth creating different guides on new features, using images to make it easier for buyers to learn how new products work and what features they offer.

Smart Camera Product Recommendations You Should Check Out 

If you’re looking for a smart camera but don’t know which one to choose, here are our top 3 camera recommendations for you to check out. All these cameras have unique features and designs, so you can find something that works best for you, depending on your needs.

  1. 1080P Waterproof IP65 Outdoor WiFi Smart Mini IP Camera for Security

This security camera has the following features:

  • Intelligent power saving; 10 hours full charge
  • Quick configuration in just two steps
  • Compatible With WiFi
  • Supports 128G SD Card Storage
  1. TD6 Tuya smart WiFi video camera doorbell Waterproof wireless low powered Phone Intercom

TD6 Tuya smart WiFi video camera offers the following features:

  • Prerecorded quick responses
  • Motion detection that gets triggered with alarm snapshot and recorded video
  • Smart playback by drag timeline on APP
  • Loud and Clear two-way talk with noise cancellation technology
  • A rechargeable battery can work for at least 4-5 months
  1. HD 1080P Wireless IP Camera Indoor Home Security WiFi Baby Camera Monitor

HD 1080P Wireless IP camera features the TUYA app, temperature detection function, music player feature, mobile tracking AI function, etc. This camera doesn’t have a monitor, which makes it a very affordable option. 

All listed smart cameras are high-quality and offer crisp images, unique features, and significant advantages for home or business. You can check out more smart camera options on our website.

Conclusions

So from this article, you’ve learned that the key steps smart cameras resellers need to take to drive market expansion include:

  • Following rapid advancements in the smart camera market;
  • Taking into consideration security and surveillance trends;
  • Highlighting the benefits to machine vision systems;
  • Understanding your customers to deliver the products they need;
  • Personalized guidance and offers;
  • Analyzing trends from other industries;
  • Focusing on urbanization processes;
  • Promoting new features of the smart cameras.

With these steps, smart camera retailers will experience market expansion, increasing demand leading to more sales.

back,view,of,business,woman,talking,to,her,colleagues,about

Why Choosing the Right China Smart Home Manufacturer is Important?

by

Are you a home automation system, business owner and looking for a suitable supplier?

Or A tech lover who wants to start a business based on automation systems?

In any case, you will need a trusted supplier that provides good quality at reasonable rates.

When it comes to choosing a supplier, Chinese suppliers are among the best.

But, still, you need to consider a lot of factors to choose the right supplier.

Why Choosing the Right China Home Automation Supplier is Essential?

Choosing the right Chinese Home Automation supplier is essential because:

1.     Getting the Best Rates:

The first important factor is getting the right price. Among hundreds of Chinese suppliers, you need to select one that best suits your budget.

2.     Getting the Best Quality:

Good quality product within your budget is as necessary as getting reasonable rates. If you choose a supplier who provides low quality at low rates, that’s not viable for you and your business.

3.     Easy Shipping:

Chinese suppliers have different shipping methods. Choose the one having less shipping cost and fast delivery.

4.     After Sales Service:

After-sales service plays a key role in keeping the customer happy. A good supplier can give after-sales services like a warranty of up to 1 year or a refund in case the customer doesn’t like the product.

Is Smart Home a Good Business?

In 2018 the smart home market was valued at $79.90 billion. It is expected to reach $622.59 billion by the end of 2026 as per a report published by fortunebusinessinsights.

Some of the potential reasons that make smart home a good business option are as follows:

·        Golden Opportunity for Tech-Gurus

Tech companies have a chance to collaborate with current home automation companies. It will help them to generate huge profits.

Not only this, but if you own a home construction company, a smart home business can be the best companion for you to pair up with. This business will make you automate your house by choosing the right type of smart device. This will leave a stronger impression on your buyers as well.

·        Increased Reselling Efficiency

Homeowners or wholesalers wondering about handing over their automated home to other business parties can get potential selling points with smart home automation. The features of a smart home appeal to the buyer in so many undefined ways. This gives excellent opportunities to the seller to explain their expertise over the installed automated system.

Also, for wholesalers, smart home automation is a good business. It will yield high profits in first-world countries due to high interest in technology. Also, it has huge projected growth in upcoming years.

How to Choose the Right Supplier?

Choosing the most reliable smart home supplier is regarded as one of the daunting tasks you can ever do while setting your smart home business. There are many supplier options out there that may offer reliable services, but how do you know which one is the best to rely on?

Don’t worry; we have collected some pinpoints to follow while choosing the right supplier.

·        Start Research for the Best Supplier

When searching for a supplier online, you’ll come across a long number of options. You can source good-quality smart home products by selecting a suitable supplier.

The best way is to short down the list by noticing their efficiency and experience. Some of the reliable channels to get your best supplier are elaborated as under.

  1. Alibaba

Alibaba is considered as one of the largest channels to get your compatible supplier. Moreover, it is considered the most active platform for searching factories and suppliers. Thus, it can be the best starting point to kick start your business.

  1. Made In China

Being the best possible alternative to Alibaba, this channel has enabled the wholesalers to get bulk quantities. It is also one of the best B2B directory and resource of China products. Not only this, MadeInChina offers an opportunity to resell the purchased products at the best prices so far.

3. Search the Web

Besides looking for the suppliers on the platforms mentioned above, you can find some potential options on search engines.

For doing so, make sure to conduct comprehensive research and analysis and short down the list according to the supplier’s efficiency.

·        Offerings of the Compatible Device

Once you’ve gone through the above-mentioned supplier platforms. The next step is to look for the compatible device you’re searching for.

·        Check Company’s Stability

Check efficiency and stability of the supplier. This includes the supplier’s experience, way of dealing, delivery services, and multi-user support.

A wide variety of efficient products are available to automate the house. But some of the highest selling devices, along with their purpose, are listed under:

1.     For Better Security

It can be one of the best additions to your house since it enables you to lock or unlock the home via the app. You can even distribute the password code to the individuals living in the house. This will make it convenient to lock or unlock the doors in an apartment or a hotel.

This Wi-Fi doorbell will cut the need for any physical appearance.at your door. The video option in this doorbell makes sure to stream the live video to determine the visitor’s existence.

This innovation will make you aware of any type of physical movement in front of your house. Thus, no more concerns about robbery or stealing.

Make the security system even better with this IP Camera that detects images with high resolution remotely. This IP Camera detects images and videos at high resolution. Some other functions include the IR technology to detect the people and animals entering your house.

Detect any uncertain motion by installing this fantastic PIR motion sensor that triggers an alarm. Whenever someone, either an animal or a human, tries to intrude on your house. 

2.     For Energy Control

Now check the temperature and humidity level of the IR devices with the help of this efficient Wi-Fi thermostat.

Besides, it plays a leading role in monitoring the temperature by connecting with the heating systems of your house. These heating systems may include a heater or geothermal heating mechanism.

Enjoy charging the home devices without getting entangled in the wired systems. Of course, it still needs to be plugged into a wire, but other than this, it makes it even easier to monitor the devices or appliances when charged fully.

Eliminate the distress of direct contact with the running machine by using the Wi-Fi IR control.

3.     For Lighting Control

Illuminate your property by installing durable and efficient light bulbs.

  • Light Switch

Operate the lights of your room remotely by using this light switch.

  • Dimmer Switch

Besides turning on and off the lights, you can now adjust the brightness level of the light bulbs with the help of a dimmer switch.

4.     Home Appliance

Enjoy the ease of setting your room curtains by installing this Wi-Fi curtain motor.

  • Robot Vacuum Cleaner

Get rid of the traditional cleaning methods by purchasing this outstanding robot vacuum cleaner.

Some other examples that customers often demand in smart houses include smoke sensors, water leak detectors, and a siren alarm.

Conclusion:

We’ve tried to go the extra mile to give you some idea about the importance of choosing suitable smart home manufacture in China. Other than that, we have covered some worthy products to select when building a smart home business.

Make sure to give a glance for better outcomes!

Copyright © 2021 LVAINIA. Terms of Service and Privacy Policy

AKS FOR A QUICK QUOTE

We will send contact you within 12 hours,pls pay attention to the Email with'' laviniasmart.com''

Sumit your Email will get beautiful led bulb

Let's talk ,Let's work

We Hate Popups

But we hate the thoughts of you miss out on our updated smart home devices packed prices.

Direct to us